FJ-2513

149-2513 Fuel Filter 10 Micron for Onan QD Generator HDKAH HDKAK

Fuel FiltersCE / ISO 9001

This is the fuel filter that hangs under the Onan Quiet Diesel generator in an RV, on the HDCAA, HDKAH, HDKAK, HDKBA, HDKCA and HDKCB models. It is a box-style metal filter that stops 98% of the abrasives in diesel above 10 micron, and when it loads up the generator shows it as a hard start, a surge under load or a shutdown at the worst moment. It replaces 149-2513 along with BF-806, FF236, 33063, PF-888, P50033 and 25010487.

$13.99/ unit · referenceMOQ:1 units
Qty
min 1 units
Tier Pricing (USD / unit)
QtyUnit Price
1+ units$13.99
10+ units🎯 Recommended$13.29
50+ units$11.89
100+ units$11.19

📋 Key Specs

Part Number149-2513
Filter TypeFuel filter, box style, metal body
Micron Rating10 micron
Efficiency98% of abrasive particles above 10 micron
MaterialMetal body with cellulose media
Outer Diameter 1111 mm (4-3/8 in)
Weight370 g (13.05 oz)
Contents1 fuel filter
NotesThe other two body dimensions are not listed here; published figures for this part disagree by more than 20 mm, so compare the old filter against the new one before fitting
ApplicationOnan Quiet Diesel HDCAA, HDCAB, HDKAH, HDKAJ, HDKAK, HDKBA, HDKCA, HDKCB

❓ FAQ

Often it is. A loaded filter starves the injection pump under demand, which shows up as long cranking and a surge when the air conditioner or a microwave loads the generator. Change the filter first; if the symptoms stay, look at the fuel pump and the lines.

Change it with the oil and the air filter rather than waiting for the hour meter to hit its interval. A generator that sits over a winter can load its filter with condensation and debris before it has run many hours, and the filter is the least expensive part in that chain.

Yes. 10 micron is the rating this generator is specified for, and the media is high-flow so restriction stays low. Going to a finer filter is where people run into fuel-pressure faults, not staying at 10.

It fits the Quiet Diesel models listed here: HDCAA, HDCAB, HDKAH, HDKAJ, HDKAK, HDKBA, HDKCA and HDKCB. Check the model plate on your own unit against that list before ordering, since Onan also builds models outside this range.

They are the reference numbers this filter is sold under, from Baldwin, Fleetguard, Wix, Purolator, Luber-Finer, Caterpillar and GM among others. If the number on your old filter is in that list, this is the part.

MOQ varies by product: 5–100 units for standard parts (see product page). Tier pricing decreases with volume. Custom parts usually ≥ 50 units, evaluated by process.

Stock/short-run: 7–15 days; bulk orders 20–35 days; custom 30–45 days incl. sampling. Note your deadline in the inquiry — sales will confirm capacity.

Add products to the inquiry list and submit with contact info. Sales contact you within 24h and issue a formal quotation (tier pricing + proforma invoice) within 48h. The AI assistant can pre-fill inquiries in chat.

Yes. We develop from drawings/samples and support private labeling. Process: evaluation → sampling (15–25 days) → approval → mass production.

Payment: T/T 30% deposit + 70% before shipment / L/C / Trade Assurance. Shipping: FOB Ningbo/Shanghai, CIF or DDP; EU & NA warehouses; sea/air/express.

ISO 9001 & IATF 16949; CE/UL/ATEX on key products. Every batch ships with inspection reports; third-party inspection (SGS/BV) supported.

Description

Product Overview

Onan mounts the 149-2513 filter under the generator, on the pressure side, ahead of the injection pump. It is a box-style metal filter rated at 10 micron with 98% efficiency, it is the part that decides whether grit reaches the pump and injectors. On an RV that sits between trips the filter can load up before the hour meter suggests a change, so hard starting and a surge under load are the first signs to act on. It replaces the cross numbers BF-806, FF236, 33063, 3063, PF-888, P50033 and 25010487, fits the Quiet Diesel models HDCAA, HDKAH, HDKAJ, HDKAK, HDKBA, HDKCA and HDKCB.

Key Features

10 micron, 98% efficiency — stops the carbon, sand and metal debris that wear an injection pump, before it reaches the plungers.
Box-style metal body — the OEM form factor for the Onan under-generator mount, so it drops into the existing bracket and line fittings.
High-flow media — keeps restriction low so the generator pulls its full load without a fuel-pressure fault.
Covers the Quiet Diesel range — HDCAA, HDCAB, HDKAH, HDKAJ, HDKAK, HDKBA, HDKCA and HDKCB all take this filter.
Long cross list — BF-806, FF236, 33063, 3063, PF-888, TP-888, ALG-888, 86063, P50033, 25010487 and P77-9307 all resolve to this part.

Cross Reference

Replaces — 149-2513
Further numbers — BF-806, FF236, 33063, 3063, P50033, PF-888, TP-888, ALG-888, 86063, P77-9307, 25010487
Not to be confused with — the air and oil filters on the same generator, which are separate part numbers

Specifications

Part Number — 149-2513
Filter Type — Fuel filter, box style, metal body
Micron Rating — 10 micron
Efficiency — 98% of abrasive particles above 10 micron
Material — Metal body with cellulose media
Outer Diameter 1 — 111 mm (4-3/8 in)
Weight — 370 g (13.05 oz)
Contents — 1 fuel filter
Notes — The other two body dimensions are not listed here; published figures for this part disagree by more than 20 mm, so compare the old filter against the new one before fitting
Application — Onan Quiet Diesel HDCAA, HDCAB, HDKAH, HDKAJ, HDKAK, HDKBA, HDKCA, HDKCB

Applications

Onan HDKAH HDKAJ HDKAK — Quiet Diesel models, Spec A through K
Onan HDCAA HDCAB — Spec A through D, same under-generator filter
Onan HDKBA HDKCA HDKCB — Spec A through E and A through F, same part
Service rhythm — change it with the oil and the air filter; a filter that sits over a winter can load up before the hour meter says so