Oil Filter W 719/5 3/4-16 UNF for VW, Porsche, Atlas Copco
Spin-on oil filter KF70055, 3/4-16 UNF thread and 122 mm overall height. Cross-references MANN W 719/5, Deutz 0117 2346 and VW 056 115 561 G. Fits Deutz industrial engines, Volkswagen Group and Porsche applications, plus Atlas Copco screw compressors.
📋 Key Specs
| Part Number | KF70055 |
| Filter Type | Spin-on oil filter |
| Thread Size | 3/4-16 UNF |
| Overall Height | 122 mm |
| Bypass Valve | 2.5 bar |
| Anti-Drainback Valve | 1 |
| Seal | Gasket 62 x 71 mm |
| Media | Pleated cellulose |
| Packaging | 1 piece |
❓ FAQ
Yes. KF70055 carries the same 3/4-16 UNF thread and 62 x 71 mm gasket and is listed against W 719/5, together with Deutz 0117 2346 and VW 056 115 561 G.
Because the sources disagree by two millimetres: one catalogue gives 78 mm across, while MANN publishes 76 mm for W 719/5. Two millimetres is above the tolerance used here, so the figure is left off. The gasket seat and the old part number are the reliable check.
3/4-16 UNF, male on the can. It is the same thread as the W 712/4 and W 914/2 references, so height and bypass pressure are what separate those three cans.
Yes. 931 107 701 00 is one of the numbers listed against W 719/5, and KF70055 is listed against the same reference. Confirm the number on the old filter before ordering.
Yes. A 62 x 71 mm gasket is in the box; it seats between the can and the housing face and is replaced at every oil change.
MOQ varies by product: 5–100 units for standard parts (see product page). Tier pricing decreases with volume. Custom parts usually ≥ 50 units, evaluated by process.
Stock/short-run: 7–15 days; bulk orders 20–35 days; custom 30–45 days incl. sampling. Note your deadline in the inquiry — sales will confirm capacity.
Add products to the inquiry list and submit with contact info. Sales contact you within 24h and issue a formal quotation (tier pricing + proforma invoice) within 48h. The AI assistant can pre-fill inquiries in chat.
Yes. We develop from drawings/samples and support private labeling. Process: evaluation → sampling (15–25 days) → approval → mass production.
Payment: T/T 30% deposit + 70% before shipment / L/C / Trade Assurance. Shipping: FOB Ningbo/Shanghai, CIF or DDP; EU & NA warehouses; sea/air/express.
ISO 9001 & IATF 16949; CE/UL/ATEX on key products. Every batch ships with inspection reports; third-party inspection (SGS/BV) supported.
Description
Product Overview
KF70055 is a spin-on oil filter with a 3/4-16 UNF thread and a 122 mm overall height, cross-referencing MANN W 719/5, Deutz 0117 2346 and VW 056 115 561 G. On this family the thread and the gasket diameter decide the fit; overall height differs by a few millimetres between the makers that share the reference.
