Oil Filter W 7053 M20x1.5 for Deutz 1008, JCB 100 Series
Spin-on oil filter KO70022, M20 x 1.5 mm thread. Cross-references MANN W 7053, MAHLE OC 100, Hengst H90W13 and Deutz 1285 0069. Fits Deutz 1008 series engines in JCB 100 Series skid steer loaders and Atlas AR wheel loaders.
📋 Key Specs
| Part Number | KO70022 |
| Filter Type | Spin-on oil filter |
| Thread Size | M20 x 1.5 mm |
| Bypass Valve | 1.5 bar |
| Media | Pleated cellulose |
| Seal | Gasket supplied with filter |
| Packaging | 1 piece |
❓ FAQ
Yes. KO70022 carries the same M20 x 1.5 mm thread as W 7053 and is listed against it, together with MAHLE OC 100 and Deutz 1285 0069. Since two catalogues publish different outside diameters for this family, compare the thread and the old part number rather than the can width.
Because the sources disagree by more than a millimetre: one catalogue lists 78.5 mm across and 84.5 mm tall, while MANN and MAHLE both give 76 mm and 89 mm for the same reference. Publishing either figure would be a guess, so both are left off. Measure the old can if you need to confirm.
M20 x 1.5 mm, male on the can, matching the Deutz 1008 engine block. A 3/4-16 UNF can will not seal on this housing even though the two look similar.
Yes, on the machines that carry Deutz 1008 engines and list W 7053 or 1285 0069. The same filter is also listed for Atlas AR wheel loaders, Haulotte HA aerial platforms and Lombardini LDW engines.
Yes. The gasket is supplied in the box; it is the ring that sits between the can and the housing face and is normally replaced at every oil change.
MOQ varies by product: 5–100 units for standard parts (see product page). Tier pricing decreases with volume. Custom parts usually ≥ 50 units, evaluated by process.
Stock/short-run: 7–15 days; bulk orders 20–35 days; custom 30–45 days incl. sampling. Note your deadline in the inquiry — sales will confirm capacity.
Add products to the inquiry list and submit with contact info. Sales contact you within 24h and issue a formal quotation (tier pricing + proforma invoice) within 48h. The AI assistant can pre-fill inquiries in chat.
Yes. We develop from drawings/samples and support private labeling. Process: evaluation → sampling (15–25 days) → approval → mass production.
Payment: T/T 30% deposit + 70% before shipment / L/C / Trade Assurance. Shipping: FOB Ningbo/Shanghai, CIF or DDP; EU & NA warehouses; sea/air/express.
ISO 9001 & IATF 16949; CE/UL/ATEX on key products. Every batch ships with inspection reports; third-party inspection (SGS/BV) supported.
Description
Product Overview
KO70022 is a spin-on oil filter threaded M20 x 1.5 mm, cross-referencing MANN W 7053, MAHLE OC 100 and Deutz 1285 0069. The thread is the dimension that decides the fit on this family: the can spins onto the engine block on M20 x 1.5 mm, and the gasket in the box seals it against the housing face.
