Hydraulic Filter WD 950/2 1-12 UNF for Claas, Vögele 93 mm
Spin-on hydraulic filter KO70026, 93 mm diameter, 172 mm overall height, 1-12 UNF thread. Cross-references MANN WD 950/2, Claas 063.399.40 and Deutz 1-2111-225-226.00. Fits the hydraulics of Claas Dominator and Jaguar harvesters, Vögele pavers and Doosan DH excavators.
📋 Key Specs
| Part Number | KO70026 |
| Filter Type | Spin-on hydraulic filter |
| Outer Diameter | 93 mm |
| Overall Height | 172 mm |
| Thread Size | 1-12 UNF |
| Seal | Gasket 62 x 71 mm |
| Bypass Valve | 3.5 bar |
| Media | Pleated cellulose |
| Packaging | 1 piece |
❓ FAQ
Because the reference it replaces, MANN WD 950/2, is a hydraulic filter in MANN's own catalogue, and the machines it serves use it on the hydraulic circuit. The KO prefix is the supplier's internal coding and does not decide the category. Fitting an engine oil filter of the same size here would not be correct.
Yes. KO70026 matches WD 950/2 on 93 mm outside diameter, 172 mm overall height, 1-12 UNF thread and the 62 x 71 mm gasket, all four figures confirmed against the MANN data. It is a direct swap.
No. They are the gasket inside and outside diameters. The can is closed, so there is no through bore to measure; the two figures describe the sealing ring that sits against the filter head.
Yes, on machines that list WD 950/2 or 063.399.40. The same filter is listed for Claas Dominator 6 and 8 combines, Mega I and II, Vögele pavers and Doosan DH excavators.
3.5 bar. That is higher than the 1.5 to 2.5 bar used on the engine oil filters in this range, and it is set for hydraulic oil viscosity rather than engine oil.
MOQ varies by product: 5–100 units for standard parts (see product page). Tier pricing decreases with volume. Custom parts usually ≥ 50 units, evaluated by process.
Stock/short-run: 7–15 days; bulk orders 20–35 days; custom 30–45 days incl. sampling. Note your deadline in the inquiry — sales will confirm capacity.
Add products to the inquiry list and submit with contact info. Sales contact you within 24h and issue a formal quotation (tier pricing + proforma invoice) within 48h. The AI assistant can pre-fill inquiries in chat.
Yes. We develop from drawings/samples and support private labeling. Process: evaluation → sampling (15–25 days) → approval → mass production.
Payment: T/T 30% deposit + 70% before shipment / L/C / Trade Assurance. Shipping: FOB Ningbo/Shanghai, CIF or DDP; EU & NA warehouses; sea/air/express.
ISO 9001 & IATF 16949; CE/UL/ATEX on key products. Every batch ships with inspection reports; third-party inspection (SGS/BV) supported.
Description
Product Overview
KO70026 is a spin-on hydraulic filter measuring 93 mm outside diameter and 172 mm overall height, threaded 1-12 UNF and cross-referencing MANN WD 950/2, Claas 063.399.40 and Deutz 1-2111-225-226.00. It is a hydraulic return or suction filter, not an engine oil filter, despite the KO prefix carried on the catalogue line.
