This site uses analytics cookiesWith your consent we use Google Analytics to understand traffic and improve the site. Declining does not affect any feature.Privacy Policy

HomeProductsMarine FiltersFJ-2010PM
2010PM-OR Fuel Filter Element 30 Micron for Racor 500FG30 Series
FJ-2010PM

2010PM-OR Fuel Filter Element 30 Micron for Racor 500FG30 Series

Marine FiltersCE / ISO 9001

2010PM-OR is a 30 micron fuel filter element with 98% water removal efficiency for the Racor 500 turbine series, 79 mm (3.1 in) in diameter and 69 mm (2.7 in) tall. It fits 500FG30, 500FG1230, 500FG2430 and 75500FGX30 housings, is rated 60 gph at 15 psi, and cross-references PF598-30, FS20103, FS19575, CS8597, 3917924 and 33794. An o-ring and an end cap handle are included.

$7.99/ unit · referenceMOQ：1 units
Qty
min 1 units
Tier Pricing (USD / unit)
QtyUnit Price
1+ units$7.99
10+ units🎯 Recommended$7.59
50+ units$6.79
100+ units$6.39

📋 Key Specs

Part Number2010PM-OR
Filter TypeFuel filter and water separator element, cartridge
Micron Rating30 micron, 98% water removal
Outer Diameter79 mm (3.1 in)
Overall Height69 mm (2.7 in)
Flow Rate60 gph maximum at 15 psi
NotesPrimary filtration stage; o-ring included
Contents1 filter element with o-ring
ApplicationRacor 500 turbine series 500FG30, 500FG1230, 500FG2430, 75500FGX30

❓ FAQ

It fits the 30 micron 500 series housings: 500FG30, 500FG1230, 500FG2430 and 75500FGX30. The 10 micron housings 500FG10, 500FG1210, 500FG2410 and 75500FGX10 take the 2010TM element instead.

Both are the same physical cartridge, but the 2010PM-OR is 30 micron for primary filtration and the 2010TM-OR is 10 micron for primary or final filtration. The micron choice follows the housing it goes into.

The element is rated 98% water removal at 30 micron. Water is coalesced out of the fuel and collects in the bowl, so the bowl needs draining rather than waiting for the element to load up.

It cross-references 2010PM-OR, PF598-30, FS20103, FS19575, CS8597, 3917924 and 33794. Any of those numbers on the old element confirms the match.

The end cap has a moulded handle, so the element is gripped by hand. Drain the bowl, unscrew the tee handle or lid, pull the element straight up by the grip, drop the new one in with its o-ring and prime before starting.

MOQ varies by product: 5–100 units for standard parts (see product page). Tier pricing decreases with volume. Custom parts usually ≥ 50 units, evaluated by process.

Stock/short-run: 7–15 days; bulk orders 20–35 days; custom 30–45 days incl. sampling. Note your deadline in the inquiry — sales will confirm capacity.

Add products to the inquiry list and submit with contact info. Sales contact you within 24h and issue a formal quotation (tier pricing + proforma invoice) within 48h. The AI assistant can pre-fill inquiries in chat.

Yes. We develop from drawings/samples and support private labeling. Process: evaluation → sampling (15–25 days) → approval → mass production.

Payment: T/T 30% deposit + 70% before shipment / L/C / Trade Assurance. Shipping: FOB Ningbo/Shanghai, CIF or DDP; EU & NA warehouses; sea/air/express.

ISO 9001 & IATF 16949; CE/UL/ATEX on key products. Every batch ships with inspection reports; third-party inspection (SGS/BV) supported.

Description

Product Overview

2010PM-OR is a cartridge fuel filter and water separator element rated 30 micron with 98% water removal efficiency, sized 79 mm (3.1 in) in diameter and 69 mm (2.7 in) tall. It drops into the Racor 500 turbine series housings 500FG30, 500FG1230, 500FG2430 and 75500FGX30, flows up to 60 gph at a maximum 15 psi, and comes with its o-ring so the bowl seal is renewed at the same time as the media.

Key Features

30 micron primary media — positioned as the first stage ahead of the engine filter, it takes the bulk of the dirt and rust out of the fuel so the finer secondary element lasts its full interval.
98% water removal — the media coalesces water rather than passing it, and the separated water drops into the bowl to be drained at the tap.
End cap handle — the moulded handle on the top cap lets the element be pulled and seated by hand, which removes the need to lever it out of the housing.
Sealed with a new o-ring — the o-ring ships with the element, so the bowl joint is not the old ring compressed a second time.
60 gph at 15 psi — the flow rating matches the 500 series housings it is listed for, so the element does not become the restriction in a lift-pump feed.

Cross Reference

Element numbers — PF598-30, FS20103, FS19575
Other references — CS8597, 3917924, 33794
Housings — 500FG30, 500FG1230, 500FG2430, 75500FGX30

Specifications

Part Number — 2010PM-OR
Filter Type — Fuel filter and water separator element, cartridge
Micron Rating — 30 micron, 98% water removal
Outer Diameter — 79 mm (3.1 in)
Overall Height — 69 mm (2.7 in)
Flow Rate — 60 gph maximum
Notes — Maximum pressure 15 psi; primary filtration stage
Contents — 1 filter element with o-ring
Application — Racor 500 turbine series 500FG30, 500FG1230, 500FG2430, 75500FGX30

Applications

Marine diesel — primary fuel filtration on 500 series turbine housings
Generator sets — standby and prime power units running the same housings
Housing family — 500FG30, 500FG1230, 500FG2430, 75500FGX30
Service position — first stage, ahead of the on-engine filter
Install note — fit the new o-ring, prime the housing, run the engine and check the bowl joint for weep after a few minutes

📄 Downloads

🔗 Related Products